![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| STAR Grain Perfect Stain Base Custom Color Mixing with O-J Colorants |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Materials required:
1. GRAIN-PERFECT® The GRAIN-PERFECT STAIN BASE formula contains all of the ingredients of a pigment wiping stain, minus the color. The stain base is used to extend (reduce color) of any stock color. By adding O-J TINTING COLORS to the GRAIN-PERFECT STAIN BASE, a high quality pigment wiping stain of any desired color is produced. |
How to use: Mix any combination of STAR O-J TINTING COLORS into the GRAIN-PERFECT STAIN BASE at a rate between 3% and 20%. Use about 3% for lighter colors such as light oak. Use 12% for medium colors such as medium oak. Use 20% for darker colors such as dark oak (DO NOT EXCEED 20%). To shade warmer add red tones, to shade cooler add yellow or green tones. Apply your custom stain with a brush or cloth, then wipe off excess. Allow approximately 30 minutes drying time before topcoating. Wood Stain Suggested Starting Formulas: The following chart gives the approximate amount of STAR O-J TINTING COLORS (see numbers on chart below), in ounces per gallon by volume; to achieve some typical wood stain colors. - (Do Not Exceed 20%) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||